ATI Technologies 39-0220 Работа - Страница 15

Просмотреть онлайн или скачать pdf Работа для Промышленное оборудование ATI Technologies 39-0220. ATI Technologies 39-0220 15 страниц.

Cow Number Errors.

During the tag linking process, a quite common error is to transpose digits in the cow number so that the 'right' ear tag is
linked to the 'wrong' cow. When milking begins the situation shown in the diagram occurs:
The cow number is actually 671.
The system has read the ear tag and associated it with cow 617 which appears in the MicroMarque3S cow
window.
The tag number is correct; the digits '7' and '1' have been transposed during linking due to mis-keying.
The most expedient way to correct the error is to delete both cows- 617' and '671' and re-link to the correct
cow numbers.
When the current side has finished scanning and feeding:
Key the first cow number. This displays the cow record.
Press Shift+Change(DELETE) and the record is removed from the system.
Repeat the procedure for the second cow when it comes through for milking so that at the end of milking both
cow records are deleted.
Create new records for both cows using the MicroMarque3S and correct cow numbers.
When the cows appear at the next milking, they will be scanned in the normal way but the system will 'beep' and
report an error because neither cow has been linked.
Link each cow (See Page 8) taking care to key the proper cow numbers.
If the cows have flags set or data that needs to be retained, make a note of it before deletion so that it can be
reinstated when the cow records are corrected.
Cow
Program
BULLING
BULLING
Yield/Flags
Ration
A.I.
SLOW
6
1
SLOW
6
7
HERRINGBONE
AUTO-ID
OPERATION: 10
Stall/Side
DELETE
Change
+
7
Shift
A.I.
+
1
Shift
DELETE
Change
DELETE
Change