Community Distributed Design DS8SUB Руководство по установке и эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Динамики Community Distributed Design DS8SUB. Community Distributed Design DS8SUB 12 страниц. Distributed design series surface mount loudspeakers
Также для Community Distributed Design DS8SUB: Установка и эксплуатация Техническое обслуживание Руководство пользователя (12 страниц)

Installation and Wiring

1. Connect incoming input wires (and

optional loop-thru wires) from wall

to 4-pole Euroblock screw terminals

concealed in the base of the Infin-A-Ball

bracket.*

*Note: Check local codes

to determine if a wall box

or metal plate is required

for the integrated wiring.

See page 10.

2. Secure the Infin-A-Ball bracket to the wall

using your screws or other fasteners according

to local building and safety codes.

3. Insert the hex wrench into the socket near

the rear of the loudspeaker cabinet, and turn

counterclockwise to loosen the clamp setscrew.

4. Fit the cabinet onto the IAB bracket's ball-

end, then tighten the clamp sufficiently to

hold the loudspeaker in place, but allowing for

positional adjustment.

Distributed Design Series

Surface Mount Loudspeakers

Input Wires

(not included)

Loop-Thru Wires

(optional)

Infin-A-Ball bracket

Installation and Operation Manual

Terminal Block

Loosen

Tighten

Page 7