ANDERSON-NEGELE MPI-300 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты ANDERSON-NEGELE MPI-300. ANDERSON-NEGELE MPI-300 8 страниц. Ncs-m parameter tool
Печатать страницуOperating Manual MPI-300
6.2.2 Display of Sensor Data
Immediately af ter the connection process, the sensor data are read out and displayed
automaticall y.
The sensor ID box contain the f irmware version, serial number and type of the sensor. If the
connection is not successf ul, the # symbol only appears. The NCS-M sensor can only be conf ig-
ured using a f irmware version 3.1 or higher. If the sensor contains an older f irmware version, it
cannot be conf igured and a corresponding error message is displayed.
6.2.3 Sensor Status
As l ong as the sensor is connected, it is perf orming a periodically measurement and the cur-
rent measurement result and the switching signal are displayed.
The state of the switching output is displayed activated in green ("yes") or deactivated in red
("no"). In addition, the process value of the measurement is displayed in percent. As long as
the programming adapter is connected t o the sensor, the eval uation takes place immedi-
ately. A time del ay set in the sensor is ignored f or the PC application.
6.2.4 Configuration of Sensor
The detection of the medium can be conf igured with the sliders at the bottom of the program.
7