ATIM ACW/LW8-MR1 Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы ATIM ACW/LW8-MR1. ATIM ACW/LW8-MR1 17 страниц. Metering / state of dry contacts
Печатать страницу
Installation
NOTE
The antenna is integrated in the housing which must be installed vertically with the cable gland facing downwards.
It is advisable to open the box to access the terminal block. To do this, insert the
screwdriver into the slot and tilt it downwards to lift the internal tab (see photo
opposite).
Then pull on the back side to separate the two parts of the case.
For best results, it is recommended to install the box without environmental
obstruction and to place it at a minimum height of 1m50.
It must be mounted on a vertical support or fixed to a wall (especially not on a
metal post!).
The box is fixed on a flat wall or a tube according to the type of installation
desired.
The cable should not exceed 10m in length and should be shielded.
ATIM_ACW-MR1_UG_EN_V1.6
1,50m
10