Caroma G Series Руководство по установке и обслуживанию - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Диспенсер Caroma G Series. Caroma G Series 16 страниц. Electronic soap dispenser
Также для Caroma G Series: Руководство по установке и обслуживанию (16 страниц), Руководство по установке и обслуживанию (16 страниц), Руководство по установке и обслуживанию (17 страниц)

SETTINGS ADJUSTEMENT

wITh A REMOTE cONTROl

If desired, use the remote control to adjust the soap dispenser settings.

Hold the remote control straight in front of the sensor in a distance of about 4-6"

(10-15cm).

attention: Holding the soap dispenser remote control out of the recommended

range (too close or too far)may interfere with the remote's activation.

choose the function you want to adjust by pressing on the function button as

following:

soaP QUantItY

the 1-4 drop keys allow the user to choose the

desired soap quantity delivered.

0.7 to 0.9

0.2 to 0.4

Indication: continues blink of the red light in the

sensor eye.

* the exact soap dosage depends on the soap

viscosity and temperature.

adJ

this function resets the soap quantity delivered to

the factory setting. Press the adJ button.

indication: 2 blinks of the red light in the sensor eye.

temPoRaRY oFF FUnctIon

this function is ideal to perform any kind of activity in front of the sensor without

operating the system (for example, cleaning). the soap dispenser will remain shut

for 1 minute when this button is pressed once. to cancel this function and to return

to normal operation press the on/off button again or wait 1 minute.

indication: oFF – 2 fast blinks, on – 4 fast blinks

ReFIll tHe soaP tanK

once the soap tank has been refilled, press the FIll button. the pump will work for

one minute in order for the soap to start coming out of the soap dispenser spout.

to stop this activity press the FIll button again.

1.2 to 1.6

2.1 to 2.3