Electrolux EHC944BB Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Варочная панель Electrolux EHC944BB. Electrolux EHC944BB 20 страниц. Ceramic glass hob
Печатать страницу
TROUBLESHOOTING
Problem
Red rings, limescale or water
rings, shiny metallic or other
discolouration, scratches/
shadows, bubbles or other
miscellaneous marks or stains on
ceramic glass cooktop surface.
Pitting of ceramic glass surface.
The cooking zones will not switch
on or are not functioning.
Acoustic signal sounds when
appliance is switched off.
The residual heat indicator is not
displaying anything.
The automatic warm up function is
not switching itself on.
Acoustic signal sounds and
appliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds.
is lit.
and number are displayed.
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the
Customer Care Department.
WARNING!
Repairs to the appliance are only to be carried out
by qualified service engineers. Considerable danger
to the user may result from improper repairs.
Possible cause
Cooktop surface has not been
cleaned correctly. Cleaning of the
cooktop surface is not covered under
warranty. If a service call is placed
to clean the cooktop you will be
charged for the visit.
Spillovers of liquid with high sugar
content.
• More than 10 seconds have
passed since the appliance was
switched on.
• The child safety device is switched
on
.
• Several sensor fields were touched
at the same time.
• Automatic switch off has been
triggered.
• The lock is switched on
The control panel is wholly or partly
covered by objects.
The cooking zone was only on for a
short time and is therefore not hot.
• There is still residual heat on the
cooking zone
.
• The highest heat setting is set
• The heat setting was set using the
sensor field .
The On/Off sensor field has been
covered up, e.g. by a cloth.
• Overheating protection for the
cooking zone has been triggered.
• Automatic switch off has been
triggered.
Electronics fault.
Remedy
Use a ceramic glass cleaner such as
Cerapol.
These types of spills must be removed
immediately with a special scraper for
the glass. If not permanent damage to
the cooktop glass can occur which is not
covered under warranty.
Switch the appliance on again.
Deactivate the child safety device (See the
section "Child safety device").
Only touch one sensor field.
Remove any objects (pan, cloths, etc.) that
are lying on the control panel. Switch the
appliance on again.
Switch off the lock (See the section
.
"Locking/unlocking the control panel").
Remove objects.
If the cooking zone is supposed to be hot,
call the Customer Service Department.
Let the cooking zone cool down.
The highest heat setting has the same
.
power as the automatic warm up function.
1. Switch off the cooking zone
2. Set the cooking zone using the sensor
field
.
Do not place any objects on the control
panel.
Switch off the cooking zone. Switch the
cooking zone on again.
Switch off the cooking zone. Switch the
cooking zone on again.
Disconnect the appliance from the electrical
supply for a few minutes (Take the fuse
out of the house's wiring system) If after
switching on again,
call the customer service department.
IMPORTANT!
If the appliance has been wrongly operated, the visit from
the customer service technician or dealer may not take
place free of charge, even during the warranty period.
15
is displayed again,