Dremel 3D40 Idea Builder Инструкции - Страница 5

Просмотреть онлайн или скачать pdf Инструкции для 3D-принтеры Dremel 3D40 Idea Builder. Dremel 3D40 Idea Builder 5 страниц. Clogged heatsink tube replacement
Также для Dremel 3D40 Idea Builder: Краткое руководство по эксплуатации (2 страниц), Руководство (4 страниц), Инструкции по обслуживанию (2 страниц)

Step 8: Test the Machine

1. Level the printer before moving forward – Navigate to the

leveling screen by pressing level on the home screen, and

following the instructions on screen.

2. Navigate to "Filament" and follow the on screen instruc-

tions to load filament.

3. Build the "Test Print" file on the machine to ensure the

3D40 printer is working correctly.

4. If prints are not adhering to the build plate, the z-axis offset

may need to be adjusted. If so, continue to step 9.

2610038113

Congratulations!

You are now ready to build. Build On.

Step 9: Adjusting the Z-axis Offset

1. Navigate to the z-axis offset screen, following: Tools Set-

tings Z-Axis Offset.

2. Follow the on-screen instructions to either increase or

decrease the offset.

3. Always adjust the z axis offset once (0.1mm increments/

decrements) and test by repeating Step 8 above, before

making any further z axis offset adjustments.

Figure 17: Z-Axis Offset screen

11/16