Andonstar AD407 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Микроскоп Andonstar AD407. Andonstar AD407 14 страниц.
Также для Andonstar AD407: Руководство пользователя (11 страниц)
Печатать страницу
(P2, Assembly1)
(P3, Assembly2)
Assembly
1. Screw the optical bracket on to the base (see the left picture above,P2 ).
2. Once you have done so, if the bracket is not aligned over the base, unscrew the locking ring, adjust the
bracket's
direction,
and
then
turn
the
locking
ring
clockwise
until
it
is
tight.
(After doing so, it will still be possible to hold the base and
turn the bracket if sufficient force is applied, but it will not spin freely.)
3. Loosen the small thumbscrews on the optical bracket.
4. Slide the optical stack in to the ring of the optical bracket.
5. Tighten the thumbscrews to hold the optical stack in place.
If done correctly, you should be able to not just turn the focus controller of the optical stack freely, but also
freely adjust the monitor, the angel between the base and the optical bracket, while the rest of
microscope remains in place. If you have any question or problem for assembly, please contact us as soon
as possible, so you won't damage the device during assembly.
Buttons
7