1Wing XBow2 Инструкции по сборке - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по сборке для Игрушка 1Wing XBow2. 1Wing XBow2 10 страниц.

1. Build phase: control horns and tail interface

Openings for linkages and control horns

Put tape around the area of

interest and draw openings

according to drawing. Use the

flaps inner edge as reference.

Use e.g. a Dremel to carefully cut

out openings.

Roughen the surface area around

the horns to improve bonding.

Remove the sandwich material

and silicone flap reinforcement in

the area of the control horns to

ensure proper gluing. All gluing

surfaces must be roughened and

Cleaned with alcohol.

The main spar needs ~6-8mm

holes to rout through the linkages.

Mark the positions and carefully

manually drill with a long drill or

round file.

Install M2.5 clevis and rod to help

align the horns.

Glue horns with thickened gluing

epoxy.

The front surface of the horn shall

be flush with the flaps edge.

The horn shall be directly bond to

the lower outer skin of the wing.

Ensure proper alignment and

secure with tape.

1Wing

Martin Stobbe

Am Kuchelberg 2

82266 Inning am Ammersee