Electrolux WRH608I Series Руководство по эксплуатации и установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Вентиляционная вытяжка Electrolux WRH608I Series. Electrolux WRH608I Series 12 страниц. Retractable
Также для Electrolux WRH608I Series: Руководство по эксплуатации/инструкция по установке (12 страниц), Руководство пользователя (12 страниц)

INSTALLATION INSTRUCTIONS

Please read instructions carefully. Service calls resulting from incorrect installation will be charged for.

Exhaust air from the cooker hood must not be discharged into any heating ﬂue which may carry

combustion products from other sources. In addition, exhaust air must not be discharged into a wall

cavity, unless the cavity is designed for the purpose. Adequate ventilation of the room must

be ensured when the cooker hood is operating simultaneously with appliances burning gas or

other fuels. Installation must comply in all respects with your gas and electrical authorities. This

cooker hood is an indoor domestic appliance, and has been manufactured and tested to comply

with Australian and New Zealand Standard AS/NZS 60335.2.31

It is recommended th

at the unit be positioned at a mininum of 600mm from an electric cooktop

and 650mm for a gas cooktop, and no further from the cooktop than 800mm. Then unit

becomes less effective as the distance from the cooking surface to the hood increase.

FIXING POINT DIMENSIONS - 600mm Retractable cooker hood

FIXING POINT DIMENSIONS - 900mm Retractable

cooker hood

The maximum space between the wall and screw cap is 5mm.

Warning: Failure to install the screws or ﬁxing device in accordance with these instructions may result in

electrical hazards.

13427_Rangehood_Electrolux.indd

OPERATION GUIDE & INSTALLATION INSTRUCTIONS

650

DUCTING INSTALLATION

When installing with ducting pipe the Duct

spigot must be ﬁtted to the ducting hole

on top of the body of the cooker hood

Duct Spigot

RECIRCULATING INSTALLATION

(For Models: WRH608I* WRR614*A & WRH908I*)

When installed in recirculating mode the

ducting hole cover must be ﬁtted

Ducting hole

cover

600