Bosch 8 V-LI Professional Оригинальное руководство по эксплуатации - Страница 7

Печатать страницу

Bosch 8 V-LI Professional Оригинальное руководство по эксплуатации

16 | English

Hold the machine only by the insulated grip-

ping surfaces, when performing an opera-

tion where the cutting tool may run into hid-

den wiring. Contact with a "live" wire will

make exposed metal parts of the tool "live"

and shock the operator.

Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

Take protective measures when dust can

develop during working that is harmful to

one's health, combustible or explosive. Ex-

ample: Some dusts are regarded as carcino-

genic. Wear a dust mask and work with

dust/chip extraction when connectable.

Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

Avoid unintentional switching on. Ensure

the On/Off switch is in the off position be-

fore inserting battery pack. Carrying the

power tool with your finger on the On/Off

switch or inserting the battery pack into

power tools that have the switch on invites

accidents.

Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

also against continuous sun irradia-

tion and fire. There is danger of explo-

sion.

In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

2 609 932 590 | (26.6.07)

When the battery is defective, liquid can es-

cape and come into contact with adjacent

components. Check any parts concerned.

Clean such parts or replace them, if required.

Functional Description

Read all safety warnings and all in-

structions.

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The power tool is intended for driving in and

loosening screws as well as for drilling in wood,

metal and plastic.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Screwdriver bit*

2 Tool holder

3 Locking sleeve

4 Torque presetting ring

5 Soft grip

6 Rotational direction switch

7 On/Off switch

8 Battery unlocking button

9 Battery*

10 LED

11 Drill bit with hexagon shank*

12 Utility clip*

13 Craftsman case*

*The accessories illustrated or described are not in-

cluded as standard delivery.

Failure to follow the

Bosch Power Tools