Alert 500S LCD Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильная сигнализация Alert 500S LCD. Alert 500S LCD 13 страниц.
Печатать страницуT. IGNITION CONTROL POWER DOOR LOCK SAFETY SYSTEM
(See Feature II - 3 Programming).
. Turn the ignition switch on and close all vehicle's doors. After seconds, the system will
automatically lock the central locking system.
. Turn the ignition switch off. The system will automatically unlock the central locking system.
U. TRUNK RELEASE (Factory default setting) /
CHANNEL 3 TIMER CONTROL OUTPUT
(See Alarm Feature III - 3 Programming)
Press and hold the
button on transmitter for two seconds to
remote control the trunk release or other electric devices.
Channel is user-programmable timer output. You may program the built-in timer to send a
ground signal for any time interval between second and minutes. For instance, this timer
output may be used to turn on the headlight, power window or sunroof.
Note: Factory default setting at second pulse grounded for trunk release output.
V. CHANNEL 4 TIMER CONTROL OUTPUT
(See Alarm Feature III- 4 Programming)
Press the transmitter and buttons at the same time to active Channel
4 function. Channel 4 is user-programmable timer output. You may
program the built-in timer to send a ground signal for any time inter-
val between second and minutes. For instance, this timer output
may be used to turn on the headlight, power window or sunroof.
Note: Factory defaults setting at momentary output.
W. POWER ON MEMORY
This security system is equipped with circuitry that will allow the unit to remember its alarm state
if the power is lost and then reconnected.
6
LCd rEMOTE TrANSCEIVEr
Note: If the system is interfered by stronger radio frequency around, sources of high voltage elec-
tric power or such Obstacles like tall buildings and so on, the transmission range may get shorter
as the system uses low output power frequency.
A. BATTERY REPLACEMENT:
A .5V type AAA Alkaline battery powers the Remote Transceiver. When the power of the battery
weakens a
icon shall be displayed on the LCD screen. When the old battery is replaced to new
one, there will be beep sounds indicate the power is up and the clock on the LCD screen returns
to AM:00 after displaying all the icons. Correct the time by pressing for seconds before using
(See Timer Setting).
Note : press the button two times when the battery compartment is empty, then
insert the new battery.
B. THE REMOTE LCD ICONS WITH FUNCTION
door Lock
Your vehicle doors are locked
ARM
Armed Mode
Your vehicle is in armed mode
door Unlock
Your vehicle doors are unlocked
and the system is Disarmed
Valet Mode
All the function shall be temporar-
ily on hold
7