Bose FreeSpace DS 100SE Технический паспорт - Страница 6

Просмотреть онлайн или скачать pdf Технический паспорт для Динамики Bose FreeSpace DS 100SE. Bose FreeSpace DS 100SE 8 страниц. With ceiling mount bracket
Также для Bose FreeSpace DS 100SE: Руководство пользователя (32 страниц), Руководство по установке (17 страниц), Руководство по установке (22 страниц), Руководство по проектированию (4 страниц), Руководство по эксплуатации (21 страниц)

Печатать страницу

FreeSpace

DS 100SE

Loudspeakers

Engineers' and Architects'

Specifications

Each loudspeaker shall be a 100-watt, ported

loudspeaker system utilizing two 2.25" (57mm)

mid-high frequency drivers mounted vertically

on a rotatable, faceted baffle and a separate

5.25" (133mm) woofer. The loudspeaker shall

be used for installation on walls and other flat,

solid surfaces.

Each loudspeaker shall have a nominal rated

impedance of 8 ohms and shall be wired

in parallel with a line voltage matching

(step-down) transformer with an accessible,

front-mounted level selector appropriate for

setting various output taps. The loudspeaker

input connections will allow for direct connection

to either 70V, 100V or low-impedance amplifiers.

Exposed cosmetic surfaces of the loudspeaker

shall be paintable, and the acoustically

transparent grille component shall be

formed of powder-coated steel.

Each loudspeaker shall have a bandwidth of

65 Hz – 16 kHz and a maximum acoustic output

of 105 dB-SPL referenced to a full bandwidth

pink noise input at 1 meter at the loudspeaker's

rated power. The input connection shall consist

of a three-position barrier connector on the

included mounting bracket. Each loudspeaker

shall be wired to the mounting bracket via

a 4-pin, pre-wired connector.

Power settings available shall be: 12.5W, 25W,

50W, 100W @ 70V; 25W, 50W, 100W @ 100V;

and 100W @ 8Ω (when referenced to IEC noise

for 100 hours). The nominal dispersion shall be

180° H x 75° V at -6 dB (average 1 – 4 kHz).

When used with optional junction boxes,

which include a pre-wired ceramic connector

and a thermal fuse, the loudspeaker shall meet

numerous standards for combination music

and evacuation systems around the world.

The loudspeakers shall be the Bose

DS 100SE loudspeakers.

6 6

O O F F

8 8

p r o . B o s e . c o m

Safety and Regulatory Compliance

The FreeSpace DS 100SE loudspeakers have

passed extensive testing and comply with the

following specifications and uses:

Listed to ANSI/UL 1480-2005

• Fire Protective Signaling Use – UL Category

UUMW, File Number S 3241.

Control Number 42S9 when installed with

a junction box (on-wall or in-wall).

Not for use with DC-supervised systems.

• General Purpose Use – UL Category UEAY,

File Number S 5591 Control Number 3N89.

• The DS 100SE is suitable for use outdoors in

wet locations.

• Suitable for installation using Class 1, Class 2

or Class 3 wiring methods in accordance

with NFPA 70, National Electric Code, 2002,

Article 640.

• Suitable for use with fire alarm circuit wiring

methods in accordance with NFPA 70,

National Electric Code, 2002, Article 760.

• EMC Directive 89/336/EEC and Article 10 (1)

of the directive, EN50081-1 and EN50082-1

as signified by the CE mark.

The DS 100SE loudspeakers also have been

designed to the requirements defined in the

following European regulatory specification

for combination systems:

• British Standard Code of Practice BS 5839, Part 8.

• Tested to IEC60268-5.

Limited Warranty

The FreeSpace DS 100SE loudspeakers are covered

by a five-year transferable limited warranty.

FreeSpace