Atlas Copco 4390152285 Инструкции к продуктам - Страница 6

Просмотреть онлайн или скачать pdf Инструкции к продуктам для Инструменты Atlas Copco 4390152285. Atlas Copco 4390152285 16 страниц. Torque arm

Installation

The tool torque should not exceed the specified torque range of each spe-

cific arm.

Do not use SMC 200 and SMC 300 with a bench stand.

Mounting on a bench

• Find the optimal position for the operator to handle the torque arm.

• Install the torque arm straight in front of the operator or alternatively to the

left or right depending on whether the operator is left or right-handed.

• Firmly tighten the screws in the holder that connects the torque arm to the

bench stand. The bench stand is pre-drilled for fixing to a bench.

• Attach the safety wire (see Spare Parts) to a second point that does not limit

the working area.

Mounting on a ceiling

• Put the mounting point straight above, or as close as possible to, the point

where the torque is applied.

• Make sure that the fixation point can handle the weight and the torque of the

chosen torque arm.

• Attach the safety wire (see Spare Parts) to a second point that does not limit

the working area.

SMC-100-1600