ABSCO SHEDS CPDW50 Руководство по сборке и эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Палатка ABSCO SHEDS CPDW50. ABSCO SHEDS CPDW50 19 страниц. Skillion carport

Печатать страницу

STEP 5.

MARK THE POSITIONS FOR THE REMAINING CROSS BEAM ON THE

EDGE BEAMS.

REAR

1080

JA-3

ABSCO INDUSTRIES

Skillion Carport Model: CPDW50

LEVEL SURFACE TO ATTACH ROOF SHEETS TO.

815

USING THE JA-3 JOINER ANGLE AS A TEMPLATE,

DRILL TWO 10mm HOLES IN EACH END OF THE

CROSS BEAM. SECURE TWO JA-3 JOINER ANGLES TO

EACH END OF THE CROSS BEAM WITH TWO M10 x 20mm

BOLTS, NUTS AND WASHERS. THE JOINER ANGLES

SHOULD BE FLUSH WITH THE TOP OF THE CROSS BEAM

TO ACHIEVE A LEVEL SURFACE TO ATTACH THE

ROOF SHEETS TO.

POSITION THE JOINER PLATE (JP) ON THE EDGE BEAM TO THE DIMENSIONS

SHOWN ABOVE, AND DRILL TWO 10mm HOLES IN THE EDGE BEAM. MOVE THE

JOINER PLATE TO THE INSIDE OF THE EDGE BEAM, TO ACT AS A LARGE

WASHER FOR THE BOLTS. SECURE THE CROSS BEAMS TO THE EDGE BEAMS

AS SHOWN BELOW WITH TWO M10 BOLTS,

NUTS AND WASHERS AT EACH END.

ASSEMBLY INSTRUCTION MANUAL

Absco Industries

815

5500

CARPORT MODEL: CPDW50

FRONT

1080

10-05-2017

PAGE 11