ABSCO SHEDS CPSW50 Руководство по сборке и эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Палатка ABSCO SHEDS CPSW50. ABSCO SHEDS CPSW50 18 страниц. Skillion carport
Печатать страницуSTEP 10
BEND THE ENDS OF 16 FLAT STRIPS (270mm X 25mm) AS
SHOWN AND SECURE AT MAXIMUM
1500mm CENTRES WITH ONE
SCREW AT EACH END.
DP-5
DP-3
CUT A ROUND HOLE 51mm IN DIAMETER
IN ONE END OF THE REAR EDGE BEAM. THIS
CAN BE DONE BY DRILLING A SERIES OF 3mm HOLES
AND THEN PUNCHING OUT THAT SECTION. FIT THE GALVANISED GUTTER DROP AND SEAL WITH
SILICONE. FASTEN THE DOWNPIPES AND BENDS AS SHOWN. BEND THE 270 x 25 FLAT STRIPS
(DS) TO SHAPE AND FASTEN THE DOWNPIPE TO THE COLUMNS.
IMMEDIATE MAINTENANCE:
CLEAN DOWN ALL ROOF AND EDGE/CROSS BEAM INTERNAL AREAS. METAL FILINGS FROM
DRILLING HOLES AND USING SELF DRILLING SCREWS CAN CAUSE DISCOLORATION AND
CORROSION TO ROOF SHEETS AND GALVANIZED FRAMING SECTIONS.
ABSCO INDUSTRIES
Skillion Carport Model: CPSW50
DP-2
DP-1
DP-4
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
DS
CARPORT MODEL: CPSW50
RB
10-05-2017
PAGE 14