anko HEG40A Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Вентилятор anko HEG40A. anko HEG40A 12 страниц. 40cm pedestal fan

3 Assembly

Your Pedestal Fan has been boxed unassembled to minimise packaging waste.

Each part is designed to fit together and be disassembled easily for cleaning or storage.

To assemble the safety grille and blade assembly, take the motor assembly and place

the rear safety grille into position ensuring the safety grille fits onto the locating lugs. If

this is done correctly, the rear safety grille's carry handle will be at the top.

Fix the rear safety grille into position by replacing the locking nut tightly by hand

Do not over tighten the locking nut.

Rotate clockwise to tighten

Place the Fan Blade onto the motor spindle.

Note: The Motor shaft has a flat on one side and the hole in the centre of the fan blade

also has a flat on one side. Ensure the two flats are aligned to enable the fan blade to

be pushed on all the way.

Fix the blade into place by gently hand tightening the spinner anticlockwise onto the

end of the motor spindle. The spinner nut is self-tightening when the motor starts so do

not force it, just nip it up.

Locating Lugs

Locking Nut

Locating Lug

Spinner Nut

Page 8 of 12