anko HEG40A Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Вентилятор anko HEG40A. anko HEG40A 12 страниц. 40cm pedestal fan

Open up all locking clips on the front safety grille

Place the safety grille into position and

secure it by fastening the clips over the outer

rim. The screw and nut at the bottom of the

grille must be fitted.

3.2 Pedestal Stand and Base

Assemble the base to the support pole using the fasteners

provided.

Unscrew the height adjustment Locking Ring and remove the

ring.

Drop the base cover over the pole and down onto the cross

base.

Refit the height adjustment ring. With the ring loose extend the support pole to your

desired height and tighten the ring to prevent slipping.

Loosen the locking screw on the back of the fan control housing then

slide the fan assembly onto the pole then tighten the locking screw by

hand.

Locking Screw on Back

Page 9 of 12