anko HB956SH6PA Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Блендер anko HB956SH6PA. anko HB956SH6PA 10 страниц. Hand-held blender

3. Specifications

. Speed adjusting settings.

. Rating: 220-240V 50-60Hz 600W

4. Operation Guidelines

Caution: Blades are sharp. Handle carefully.

Before using the blender for the first time

. Remove all packaging carefully and inspect the product for any damages.

. Check the blender and power cord for any damages.

. If the product is damaged or any parts are missing, DO NOT USE.

How to use the hand blender

. Remove the protective cover from the blade on the blender shaft.

. Clean the blender shaft and beaker.

. Fit the power handle inside the blender shaft, turn it clockwise and lock until you hear a slight click.

NOTE: The marks on the power handle and blender shaft should be aligned with each other. If it is

aligned, the blender shaft is locked correctly.

. Make sure your electricity supply is the same as the one shown on the product rating label.

. Fill the food /ingredients to the beaker (not more than the maximum indicated level) to hold the

food for blending.

. Connect the appliance into a mains power outlet and hold the power handle steady. Switch the

appliance on by pressing the switch button.

. Gently immerse the blade guard completely in the ingredients.

. Blend the ingredients by moving the appliance slowly up and down and in circles.

. After you have completed blending, release the switch button, then disconnect from mains power

outlet.

WARNING: To prevent damage to the electric motor, the continuous operating time is 30

seconds for lower speed and 10 seconds for higher speed. Allow the appliance to reset at

least 2 minutes between each cycle. After operating 5 continuous cycles, allow the appliance

to cool down for 30 minutes before using it again.

Never blend hot oil, fat or meat.

. If your blender/chopper gets blocked, first stop and disconnect from mains power before clearing.

. After use, always disconnect from mains power.

. Always switch OFF and unplug from mains power before cleaning. Please refer to "care and

cleaning" instructions section in this manual.