Bed-Check Classic-Check Руководство по быстрому программированию

Просмотреть онлайн или скачать pdf Руководство по быстрому программированию для Блок управления Bed-Check Classic-Check. Bed-Check Classic-Check 2 страницы.

Печатать страницу

Bed-Check

Reducing the Risk of Falls Through

Quick Programming Guide

Innovative Technology Since 1978

This guide will assist you with manual programming of the Bed-Check

More detailed manual programming instructions can be found in the User's Guide booklet.

For programming, only the control unit and power cord are needed. (Neither a Sensormat

cord need to be plugged in during programming.)

Arming/Disarming System

Press and release

SETTINGS - Any of the following setting changes may be made independently of the others.

We recommend setting tone before volume, as some tones may seem louder than others.

Day/Night Mode Settings

Press and release

Alarm Delay Settings

PO Box 80238, Lincoln, NE 68501 • Toll Free 800-523-7956 • Fax 402-475-4023 • www.bedcheck.com

Press and release the RESET button to go from MONITOR to HOLD, or

from HOLD to MONITOR, or to silence an alarm. Please note that if the

system is on HOLD, it will reset itself and resume monitoring if weight is

placed on the Sensormat

put on HOLD and weight remains on the Sensormat

to monitoring mode in 25 seconds.

Press and release DAY/NITE button to switch between DAY and NITE

modes. NITE mode is indicated by a blue light in the splash guard.

Press and release the ALARM DELAY button to adjust the alarm delay to

1, 2, or 3 seconds.

Press and release

. In addition, if the RESET button is pressed to

DAY

Mode

Classic-Check

control unit.

nor the nurse call

, the unit will return

NITE

Mode

1 second

2 seconds

3 seconds