Bed-Check Classic-Check Руководство по быстрому программированию - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрому программированию для Блок управления Bed-Check Classic-Check. Bed-Check Classic-Check 2 страницы.

Печатать страницу

Quick Programming Guide continued

Tone Setting

Press and hold

Release; then Press/Release

Release all

Press and release to lock

Alarm Volume

Press and release

Press and hold

Release; then Press/Release

Release all

Press and release to lock

PO Box 80238, Lincoln, NE 68501 • Toll Free 800-523-7956 • Fax 402-475-4023 • www.bedcheck.com

The tone setting will be the same for DAY and NITE modes. To change

the tone press and hold the RESET button, then press and hold the

ALARM DELAY button. Release the RESET button to hear current

setting. Then press and release the RESET button until desired tone is

obtained. Release all buttons, press and release RESET once more to lock

setting.

Press and hold

The alarm volume can be adjusted separately for both the DAY and NITE

modes. First set the mode for which you are changing the volume (see

other side). Press and hold the RESET button, then press and hold the

DAY/NITE VOLUME button. Release the RESET button to hear current

setting. Then press and release the RESET button until desired volume is

obtained. Release all. Press/release RESET once more to lock the setting.

Display

Tone

Low Pitch Warble

High Pitch Warble

Triple Tone

Old McDonald

Mary Had a Little Lamb

The Farmer in the Dell

Comin' Round the Mountain

Tom, Tom the Piper's Son

Folk Song

Do - Re - Mi

Display

Decibels

67 db

73 db

77 db

80 db

81 db

83 db

85 db