Anntlent AN-CPAL70 Plus Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель Anntlent AN-CPAL70 Plus. Anntlent AN-CPAL70 Plus 11 страниц. Cell phone signal booster
Печатать страницу
of the corresponding frequency band .The corresponding LED on the right is used to indicate the
following different working conditions of the booster.
LED Indicator
LED LIGHT
②Power supply jack:
③INDOOR and OUTDOOR port：
antennas.
(3)Antennas and Cables:
Authorized antennas and cables kitting information are as follows
Name
Indoor Antenna
Rubber Antenna
Ceiling Antenna
Indoor Panel Antenna
YAgi Antenna
Outdoor Antenna
LPDA Antenna
Booster working conditions
Continuous GREEN @normal；
Twinkly GREEN @input signals may be not enough；
Continuous YELLOW @ stronger input signals, AGC is working；
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down；
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
The booster uses a power input range of DC 5-12V.
The two ports are used to connect outdoor and indoor
Model
PTE-RB-800-2100
PTE-CI-800-2500
PTE-PN-800-2500
PTE-YG-800/1900
PTE-LO-700-2500
Gain/Loss
3dbi @698-787MHz
3dbi @824-894MHz
3.5dbi @1850-1990MHz
3.5dbi @1710-2155MHz
3dbi @698-787MHz
3dbi @824-894MHz
4.5dbi @1850-1990MHz
4.5dbi @1710-2155MHz
7dbi @698-787MHz
7dbi @824-894MHz
8.5dbi @1850-1990MHz
8.5dbi @1710-2155MHz
8dbi @698-787MHz
8dbi @824-894MHz
10dbi @1710-1755MHz
10dbi @1850-1990MHz
10dbi @2110-2155MHz
9dbi @698-787MHz
9dbi @824-894MHz
10.5dbi @1710-1755MHz
10.5dbi @1850-1990MHz
10.5dbi @2110-2155MHz
4 / 11