DS Produkte 03486 Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Наружное освещение DS Produkte 03486. DS Produkte 03486 6 страниц.

Печатать страницу

■

The article may only be used with the mains adapter that is

supplied. Only use the mains adapter with this article.

■

The mains adapter should only be connected to a plug socket

that has been properly installed. The socket must also be read-

ily accessible after connection. The mains voltage must match

the technical data of the mains adapter (see the "Technical

Data" section).

■

Position the mains cable in such a way that it does not be-

come squashed or bent and does not come into contact with

hot surfaces.

■

Remove the mains adapter from the plug socket

– if the lamp is not going to be used over a lengthy period of

time,

– if a fault occurs during operation,

– before a thunderstorm,

– before the lamp is cleaned.

■

Always pull the mains adapter and never the mains cable.

■

Always check the lamp for damage before putting it into oper-

ation. If the lamp, the mains cable or the mains adapter shows

visible signs of damage, the lamp must not be used.

■

If the lamp, the mains cable or the mains adapter is defective,

do not try to repair the lamp yourself. Have any repairs done

only by a specialist workshop or the customer service depart-

ment.

Danger of Fire

■

Maintain a sufﬁ cient distance from other sources of heat and

naked ﬂ ames.

■

Never cover the article with cloths or something similar. There

is a danger of overheating!

■

The lamp may only be set up with a minimum distance of ap-

prox. 20 cm from ﬂ ammable materials such as curtains, etc.

Avoiding Damage to Material, Property and the Article

■

Do not drop the article or subject it to heavy impacts.

■

Do not expose the article to extreme temperatures, strong tem-

perature ﬂ uctuations or moisture.

Items Supplied and Article Overview

Putting Into Operation

For better illumination, the lamp head can be split in the

middle. The two individual parts can be pushed apart out-

wards.

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

1 Splittable lamp

head (LEDs can-

not be replaced)

2 Base

3 Control panel:

button: Mode

button: On / Off

button: Timer

4 Socket for the

mains adapter

5 Inﬁ nitely adjust-

able lamp neck

Not shown:

Mains adapter

Customer Service / Importer:

1. Unpack all parts and check the items supplied for complete-

ness (see the "Items Supplied and Article Overview" section)

and possible transport damage. Remove any ﬁ lms and stickers

that may be present. If you ﬁ nd any damage to the article, do

not use them (!), but contact our customer service department.

2. Set the lamp up so that it cannot fall down.

3. Adjust the lamp head (1) to the position you want using the

ﬂ exible lamp neck (5).

4. Insert the jack plug of the mains adapter into the socket (4) on

the lamp.

5. Insert the mains adapter into a properly installed plug socket

that is easily accessible.

6. Switch on the lamp with the

7. Select a mode with the

sible settings:

– warm light: 3000 K

– neutral light: 4000 K

– daylight: 5500 K

8. To activate the timer function, touch and hold the

til the light ﬂ ashes twice. The lamp switches off automatically

after 40 minutes.

9. To deactivate the timer function or switch off the lamp, touch

the

button.

Cleaning and Storage

ATTENTION!

■

Remove the mains adapter from the plug socket before clean-

ing the article.

■

Always allow the lamp to cool down fully before cleaning it or

storing it away.

■

Do not use any corrosive or abrasive cleaning agents or clean-

ing pads to clean the article. These can damage the surface.

•

Clean the lamp if necessary using a soft, dry cloth.

•

Store the lamp in a dry, clean place that is not accessible to

children and animals.

Technical Data

Article number:

Lamp:

Model number:

Mains voltage:

Power:

Illuminance:

Colour temperature:

Protection class:

Mains adapter:

Model number:

Mains voltage:

Protection class:

Disposal

The packaging material is recyclable. Dispose of the pack-

aging in an environmentally friendly manner and take it to

a recycling centre.

Dispose of the article in an environmentally friendly man-

ner. It should not be disposed of in the normal household

waste. Dispose of the article at a recycling centre for used

electrical and electronic devices. More information is avail-

able from your local authorities.

✆

+49 38851 314650 *)

Instructions

button.

button. There are the following pos-

03486

HSD9030B

5 V DC

6.5 W (max.)

700 Lux

3000 – 5500 K

III

NLA100050W1UL

100 – 240 V ~ 50 / 60 Hz, 0.2 A (max.)

button un-