DS18 CANDY-X1B Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель DS18 CANDY-X1B. DS18 CANDY-X1B 16 страниц. Monoblock subwoofer / stereo full range class d amplifiers
Также для DS18 CANDY-X1B: Руководство пользователя (3 страниц), Руководство пользователя (16 страниц)

Печатать страницу

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x1b / XXL1B

1. HIGH INPUT: High level input terminals.

2. LOW INPUT: Left and right channels inputs of the amplifier system. Preamplifier outputs of a source

(head unit) or of an external crossover must be connected to them.

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to 18dB

5. BOOST FREQUENCY: The boost frequency ranges from 40Hz to 100Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 50hz to150Hz.

7. PHASE CONTROL: Phase adjusting switch, the phase ranges from 0-180

8. REMOTE CONTROLLER OUTLET: To be connected with the remote controller, which helps to boost the

gain. Please turn the knob of volume to be maximum before using the remote.

9. REMOTE CONTROLLER: Volume level knob.

10. INDICATOR LIGHT: When power LED sends out blue light, it means that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

11. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

12. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

13. +12V: anode of power connection terminals. Connect to the anode of car battery.

14. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

15. SPEAKER: speaker connecting terminals.

XXL1B*