DSC ALEXOR Краткое руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство пользователя для Система безопасности DSC ALEXOR. DSC ALEXOR 7 страниц. Two-way wireless security system
Также для DSC ALEXOR: Руководство по программированию (5 страниц)
Печатать страницу
Before Calling...
Is the keypad beeping? Press *2. This will silence the beeping and let you
know where the trouble is.
Is there a flashing triangle on the keypad? Press *2 for status information.
Is siren going off? ENTER CODE to stop siren.
Arming & Disarming the System
Arming (Turning on)
Close all sensors (i.e. close doors and windows). The Ready indicator should be on. Arm
the system using either of the methods below.
Arming Method #1: Enter your access code. If exit door is opened and closed, system will
arm in AWAY mode. If exit doors is not opened and closed, system will arm in STAY mode.
Arming Method #2: Press STAY button or AWAY button until keypad beeps and arming
process begins.
If armed in the AWAY mode, you now have 30 seconds to leave the premises. To cancel the
arming sequence, enter your access code.
Note: If motion detectors have not been installed on the alarm system, there is no difference
in arming in STAY or AWAY mode.
Disarming (Turning off)
Enter your access code to disarm anytime the system is armed. The keypad will beep if you
walk through the entry door. Enter your code within 45 seconds to avoid an alarm condition.
Quick Exit
If the system is armed and you need to exit, use the Quick Exit function to avoid disarming
and rearming the system.
1. Press and hold the EXIT button for 2 seconds. You now have 2 minutes to leave the
premises. When the door is closed again, the remaining exit time is cancelled.
DSC Alexor
Page 2 of 7