ATS Diesel Performance Aurora Plus - 5000 Руководство по установке - Страница 14
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары ATS Diesel Performance Aurora Plus - 5000. ATS Diesel Performance Aurora Plus - 5000 18 страниц. Aurora plus - 5000 turbo kit (2003-2007) 5.9l dodge
Печатать страницуprovided in the kit to make room for the turbo-to-intercooler charge pipe.
Install the bracket by removing the alternator and bolts that secure it to the
block.
21. Install the 2-bend silicone (Figure 1, #10) elbow onto the intercooler inlet.
The A/C line that is connected to the A/C compressor and the condenser
must be routed on the driver's side of the 2-bend silicone elbow.
22. Install the charge tube (Figure 1, #14) with the 41° bend connected to the
2-bend elbow and the 50° bend connected to the reducer boot on the
factory charger.
Note: The 2-bend elbow supplied with this kit will fit intercoolers with 3"
inlets only. If the truck is equipped with an after-market intercooler that
has 3.5" inlets please order P/N 2272-202-026 from ATS Diesel.
23. Install the ATS air box (Figure 1, #1) by setting the enclosure into the
rubber mounts on the battery tray. To connect the 90° compact boot,
reach through the opening in the base of the enclosure and pull the
compact 90° boot up and onto the air box enclosure. Tighten the 4" hose
clamp to secure it in place.
24. Use the 6mm x 25mm (Figure 2, #8) bolt supplied in kit to secure the air
box mount to the fender support through the grommet removed from the
factory air box.
50° Bend
41° Bend
Air Box Mount