Attero Tech Dante unDX2IO+ Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Attero Tech Dante unDX2IO+. Attero Tech Dante unDX2IO+ 16 страниц. 4 x 2 wallplate

3 – Device Configuration
Certain 3rd party manufacturers provide audio routing functionality from within their own configuration application.
Check the applications manual/help or contact the manufacturer in question to see if this is supported. If not supported
by a 3
party tool, the audio routing may be carried out using Audinate's Dante Controller. Dante Controller can be
rd
obtained from the Audinate website (www.audiante.com/) and is available for both Mac and PC. Instructions on how to
use this application and about setting up routes on a Dante network can also be found on Audinate's website.
*Note: When using Dante controller, the unDX2IO+ will be shown using a default device name of "unDX2IO-######" where
'######' is the last six characters of the devices MAC address.
3.1 – IP Address Setup
********************************************************* IMPORTANT *****************************************************
Failure to correctly configure IP addresses will not allow an unDX2IO+ device to correctly authenticate in the unIFY Control
Panel software and while it will show up in Dante Controller, the devices parameters will not be available , the input and
output channels also won't be visible and routing of audio to and from the device will not be possible.
*****************************************************************************************************************************
In order to configure an unDX2IO+, both to set up internal parameters and also setup audio routing, the PC/Mac will need
to be able to communicate with the devices over the network. While all Dante devices will be discovered regardless of the
IP address setup on the PC or Mac, communication can only occur if the PC/Mac and the device have compatible IP
addresses.
By default, the unDX2IO+ is set to get a dynamic IP address. As with all Dante devices, if the unDX2IO+ does not find a
DHCP server to retrieve an IP address from, it will give itself an local link address sometimes also known as an automatic
private IP address (APIPA) instead. A local link IP address is always in the range 169.254.x.y.
To ensure communication, the PC/Mac can either be set to get a dynamic IP address, or be given a static IP address in the
range 169.254.x.y. The PC may require a restart if its IP address is changed for the change to take effect.
In some applications, IP addresses of devices may need to be set to something specific and that can be done once initial
communication has been established. Bear in mind however that if a static IP address is assigned to a device and that
static IP address is in a different range to the IP it was previously using to communicate with the PC/Mac, the PC/Mac will
lose communication with the device until such time as the PC/Mac IP address is also changed to an IP in range of the
devices new IP address.
Further information on IP setup for an audio system using Dante can be found in the FAQ's on the Audinate website
(https://www.audinate.com/resources/faqs).
 Attero Tech, LLC
1315 Directors Row, Suite 107, Ft Wayne, IN 46808
Phone 260-496-9668 • Fax 260-496-9879
www.atterotech.com
614-00036
unDX2IO+
User Manual