AddEnergie CoRe+ Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Кабели и разъемы AddEnergie CoRe+. AddEnergie CoRe+ 2 страницы. Cascading on a 150a circuit

Печатать страницу

CoRe+

Installation Guide for Cascading on a 150A Circuit

STEP 1:

ounting bracket preasseMbly

The preassembly requires the 150 A cascading kit

(AddÉnergie part number C+V1-PWCK-150) and 1

or 2 double 40 A breakers (AddÉnergie part number

breaker-40D) depending on the number of charging

stations to be mounted on the pedestal.

• Install the 2 provided terminal blocks (1 isolated

3-position terminal block for the live conductors,

and 1 non-isolated terminal block for the grounding

conductor) and the breakers onto the mounting

bracket with the provided screws.

• Connect the power supply cables from the top of

the terminal blocks to the breaker(s), depending on

the number of stations to be installed.

STEP 2

ounting bracket installation and power supply

cable connection

• Install the power supply cables coming from the previous

charging station and the power supply cables going to the

next one, letting 1 foot (30 cm) of cable protrude from the

conduit.

• Place the mounting bracket on the concrete base,

making sure that the anchor's threaded rods pass

through the 4 holes in the base of the bracket.

• Connect the power supply cables to the bottom of the

terminal blocks.