Anyload A1A Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Anyload A1A. Anyload A1A 5 страниц. Load cell amplifier

Introduction

Thank you for choosing Anyload A1A load cell amplifier. A1A strain gage

amplifier provides load cell and transducer signal conditioning. It is designed for

converting mV signal from load cell output into a 4~20mA or 0~10V signal. The

A1A strain gage amplifier is DC powered and can drive up to 2 x 350Ω load cells

or 4 X 700Ω load cells. It can be connected directly to 1 load cell or to several

load cells through a junction box. The amplifier is housed in an aluminum

casting enclosure and has 2 through holes for easy installation. This manual

provides the installation, operation and calibration procedures of the product.

Only simple tools like small size slotted screw driver and Philips screwdriver are

required for connecting cables during installation, adjusting the unit during

calibration and installation of enclosure cover.

From Amplifier to 24V DC Power and 0~10V/4~20mA output signal:

Vo: Output Voltage Signal 0~10V

Io: Output Current Signal 4~20mA

Vs: Input 24V DC Power

GND: Ground

2 |

ANYLOAD A1A Amplifier Product Manual (V1611)

Fig1.Connection Diagram