3onedata NP30XT series Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Сервер 3onedata NP30XT series. 3onedata NP30XT series 20 страниц. Serial device server
Печатать страницуCHAPTER 1 Access to Serial server serial device server
The CLI user manual compliant with the products as follows:
NP302-2D(RS-232),
NP302-2D(RS-485),
NP304-4D(RS-232),
NP304-4DI(RS-485),
NP308-8D(RS-232),
NP308-8DI(RS-485),
NP3016-16D(RS-232), 16 port RS-232 to Ethernet;
NP3016-16DI(RS-485), 16 port RS-485/422 to Ethernet;
1.1
Configuration through Telnet
Terminal device use telnet connect to Serial server through PC, the requirements are as follows:
1. The IP address of Serial server, can get it by search or modify (Use IP command under the system management
view);
2. If PC and serial device server in the same local area network, the IP address must in a same network segment,
otherwise, PC and serial device server must cross-router.
If satisfied these two requirements, can use telnet access to serial device server, and then configure the serial
device server.
1）Establish configuration environment, just connect PC 's Ethernet port connect to serial device server's
Ethernet port through Local area network
2）Before access Serial server through Telnet, need to input"Telnet+ Space+ serial server's IP address" for
checking, Figure 1.1.1 as follows:
3）Hit "Enter", checkout successful and till PC show"Please input hostname and password", ask user to input
user name and password, default is admin, figure 1.1.2 as follows:
2 port RS-232 to Ethernet;
2 port RS-485/422 to Ethernet;
4 port RS-232 to Ethernet;
4 port RS-485/422 to Ethernet;
8 port RS-232 to Ethernet;
8 port RS-485/422 to Ethernet;
（Figure 1.1.1）
（Figure 1.1.2）
Page1
CLI user manual