Abtus AVS-1200C/V2 Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Abtus AVS-1200C/V2. Abtus AVS-1200C/V2 8 страниц. Multimedia controller
Печатать страницуUser Operation Guide
PROGRAMMING MODE
Delay Time
Delay Time setup allows setting of delay time between switching function of projector.
Example: Projector ON Warm up time, Projector Off Cool down time and Projector Input
Switching interval time
All above timing defer from Brand and model of different Projector.
On and Off delay time range can set from 5 to 240 sec.
Other as in the switching delay timing is from 1 to 5 sec.
Auto Repeat
Auto Repeat function allow projector Power ON and Power OFF command to be send
twice automatically with a delay time. This may be required base on different brand and model
of projector.
Volume
Volume setup allows configuration of the volume setting for AV-Switcher or Projector.
Initial Volume set is the default volume setting for every Power ON.
2.0 Under File Tab
New
- Opening a NEW project
Open
- Open of program
Save
- Save a Project
Save as
- Save a Project under different name and location
Exit
- Exit of Multi Media Control Program
PROGRAMMING MODE
2.1 Opening a program file
2.3 Under Com port Tab
Setting of serial parameter of the PC configuration/communication between the PC and
Device Controller AVS-1200CV2
Com Port Setting:
Control Programs RS232 communication port select.
Select range: COM1~ COM6.
Note:
Control Programs RS232 communication protocol
default setup are as followed:
Baud Rate: 9600 bps.
Data length: 8 bits.
Parity: Non parity.
Stop bit: One bit.