Casio 2362 Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Смотреть Casio 2362. Casio 2362 5 страниц.

Печатать страницу

• Your watch comes preset with the Day Counter text settings shown below. You can

use these as they are or change them to something else, if you want.

Day Counter Number

DC1

DC2

DC3

DC4

DC5

• If there is no text assigned to a target date, the applicable day counter number

appears in place of the text.

• A minus sign (

) in the upper left corner of the display indicates that the target date

comes before the current date. No sign indicates the target date is after the current

date.

• Press D to cycle through the Day Counter records as shown below.

DC1

DC2

To set a Day Counter record

1. In the Day Counter Mode, use D to scroll through the

Target Month – Day

Day Counter records until the one you want to set is on

the display.

2. Hold down A until the flashing cursor appears on the

display, which indicates the setting screen.

• Pressing B and D at the same time causes the

message "CLEAR" to appear and clears the text (if

there is any already input), and sets the current

Timekeeping Mode date as the target date.

Cursor

3. Press C to move the flashing in the sequence shown below to select other

settings.

Text

Year

• There are eight spaces in the text, so you have to press C eight times to move to

the Year setting.

• When the Year setting is selected, the cursor changes for a four-digit target year.

4. When the setting you want to change is selected, use B and D to change it.

• Selecting the text causes the text input cursor to appear.

• When inputting text, use B and D to cycle through characters at the current

cursor location, and C to move the cursor to the right. See "Inputting Text".

• While the year, month, or day setting is flashing, use D (+) and B (–) to change

the setting.

• You can set a target date in the range of January 1, 1940 to December 31, 2039.

5. Press A to exit the setting screen.

Note

• Use the above procedure to edit Day Counter records, too.

• The display can show only three characters at a time, so longer text scrolls

continuously from right to left.

TELEMEMO

Telememo lets you store up to 20 records, each containing name and telephone

number data. Records are automatically sorted based on the characters of the name.

You can recall records by scrolling through them on the display.

Memory Number/Name

Remaining memory

Memory number

Name

• Your watch comes preset with three Telememo records with the names "FAMILY,"

"HOME," and "OFFICE," without any phone numbers. You can change or delete

these records if you want.

• See "CHARACTER LIST" at the back of this manual for details on how the watch

sorts records.

• All of the operations in this section are performed in the Telememo Mode, which you

enter by pressing C.

To create a new Telememo record

1. In the Telememo Mode, press D until a record showing

the "– – –" (indicating the new record input screen)

appears.

• If the message "FULL" appears on the display, it

means that memory is full. To store another record,

you will first have to delete some of the records stored

in memory.

2. Hold down A until the flashing cursor (

the setting screen.

Text

Meaning

21C

21ST century

PAYDAY

Payday

BIRTHDAY

Birthday

No setting

DC3

DC4

DC5

Month

Day

Telephone Number

Press A.

Telephone number

) appears on the display, which indicates

3. Input a name.

• When inputting the name, use B and D to cycle through characters at the

current cursor location, and C to move the cursor to the right. See "Inputting

Text".

• You can input up to eight characters for the name.

4. After you input the name, press C as many times as

necessary to display the number input screen.

• You can input up to eight characters for the name.

When the cursor is located at the eighth space of the

name, moving the cursor to the right causes it to jump

to the first digit of the number. When the cursor is at

the 12th digit of the number, moving it to the right (by

pressing C) causes it to jump to the first character in

the name.

5. Input a telephone number.

• Use B and D to change the character (hyphen, number, or space) at the cursor

position. The character changes in the following sequence.

Press D.

–

Press B.

6. When the character you want is at the cursor position, press C to move the cursor

to the right.

7. Repeat steps 5 and 6 until you complete number input.

• You can input up to 12 digits for the number.

• The number initially contains all hyphens. You can leave the hyphens or replace

them with numbers or spaces.

8. Press A to store your data and return to the Telememo record screen (without the

cursor).

• When you press A, the message "SORT" appears on the display for a few

seconds. After the sort operation is complete, the watch returns to the Telememo

record screen (without the cursor).

• The display can show only three characters at a time, so longer text scrolls

continuously from right to left.

To recall Telememo records

In the Telememo Mode, press D (+) to scroll through Telememo records on the

display.

• Only the memory number and name of each Telememo record appear on the

display as you scroll through Telememo records.

• Pressing A while the memory number/name screen is on the display changes to

the telephone number screen for that record.

• The display can show only nine digits of the telephone number at a time, so longer

numbers scroll continuously from right to left.

To edit a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

edit.

2. Hold down A until the flashing cursor appears on the display.

3. Use C to move the flashing to the character you want to change.

4. Use B and D to change the character.

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record

1. In the Telememo Mode, scroll through the records and display the one you want to

delete.

2. Hold down A until the flashing cursor appears on the display.

3. Press B and D at the same time to delete the record.

• The message "CLEAR" appears for a few moments, and then the cursor appears

on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

You can set three independent Daily Alarms. When an

Alarm on indicator

alarm is turned on, the alarm tone sounds when the alarm

time is reached. You can also turn on an Hourly Time

Alarm time

Signal that causes the watch to beep twice every hour on

the hour.

• The alarm and Hourly Time Signal operate in

accordance with the current digital time.

• The alarm number ("AL1" though "AL3") indicates an

alarm screen. "SIG" appears in place of the alarm

number when the Hourly Time Signal screen is shown.

Alarm number

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Hourly time signal

on indicator

To set an alarm time

1. In the Alarm Mode, press D to select the alarm whose

time you want to set.

AL1

2. Hold down A until the hour digits of the alarm time

start to flash, which indicates the setting screen.

• This automatically turns on the alarm.

3. Press C to move the flashing between the two settings shown below.

Hour

4. While a setting is flashing, use D (+) and B (–) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

2362-3

(space)

ALARMS

AL2

AL3

Minutes

SIG