Casio 2362 Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Смотреть Casio 2362. Casio 2362 5 страниц.

Печатать страницу

Alarm Operation

The alarm sounds at the preset time for about 10 seconds in all modes, or until you

stop it by pressing any button.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, press D to select an alarm or the Hourly Time Signal.

2. When the alarm or the Hourly Time Signal you want to is selected, press A to turn

it on and off.

ALM: Indicates alarm is ON.

SIG: Indicates Hourly Time Signal is ON.

• The alarm on indicator (ALM) and the Hourly Time Signal on indicator (SIG) are

shown on the display in all modes while these functions are turned on.

• If any alarm is on, the alarm on indicator is shown on the display in all modes.

STOPWATCH

The stopwatch lets you measure elapsed time, split

times, and two finishes.

• The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

Minutes

• The stopwatch continues to run, restarting from

zero after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues

Hours

even if you exit the Stopwatch Mode.

• All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing

Seconds

1/100 second

To measure times with the stopwatch

Elapsed Time

➤

Start

Stop

Split Time

➤

Start

Split

Two Finishes

➤

Start

Split

First runner

finishes.

REFERENCE

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Return Features

• If you leave a screen with flashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically saves anything

you have input up to that point and exits the setting screen.

• If you leave the watch in any mode (except for the Stopwatch Mode) for about two

minutes without performing any operation, it automatically changes to the

Timekeeping Mode.

• After you perform an operation (except for the backlight operation) in any mode,

pressing C returns to the Timekeeping Mode.

Data and Setting Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls through the data at high speed.

Initial Screens

The following shows what appears on the display first in each mode.

Mode

Timekeeping

Date Screen.

Alarm

Data you were last viewing.

Day Counter

Target Date/Text screen with data you were last viewing.

Telememo

Memory Number/Name screen with data you were last

viewing.

➤

Re-start

Stop

➤

Split release

Stop

➤

Stop

Split release

Second runner

Record time of

finishes.

second runner.

Record time of

first runner.

Screen

Time Calibration Signal Reception Precautions

Frankfurt

• At long distances that are out of the line of sight of the signal transmitter, the signal

is bounced off of the ionosphere. Because of this, such factors as changes in the

reflectivity of the ionosphere, as well as movement of the ionosphere to higher

altitudes due to seasonal atmospheric changes or the time of day may change the

reception range of the signal and make reception temporarily impossible.

• This watch is designed to receive the signal transmitted from Mainflingen. This

means that reception is best when the antenna built into the 12 o'clock edge of the

watch is facing towards Mainflingen. Note, however, that moving the watch while the

time calibration signal receive operation is taking place will make stable reception

impossible.

• Think of the watch as acting like a TV or radio when it is receiving the calibration

signal. When receiving indoors, move to a location as near as possible to a window.

Proper signal reception can be difficult or even impossible under the conditions

listed below.

Near TVs, refrigerators, computers, or other household appliances

Far away from broadcasting stations among ferro-concrete structures or near

mountains

Underground, in tunnels or in ferro-concrete buildings

Near high-tension wires, neon signs, or radio stations with interfering frequencies

Near railroads, highways or airports

In trains or cars

• Radio interference can make signal reception impossible.

➤

• Strong electrostatic charge can result in the wrong time being set.

• The daily alarm and hourly time signal do not operate during signal reception.

Clear

• If you are in an area where proper time calibration signal reception is impossible, the

watch keeps time within ± 15 seconds a month at normal temperature.

➤

Timekeeping

Clear

• Note that you cannot switch between standard time and Daylight Saving Time while

GMT is selected as the city code.

• The day of the week is automatically displayed in accordance with the date (year,

➤

month, and day) settings.

• The year can be set in the range of 2000 to 2039.

Clear

• The watch's built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch's battery replaced.

• The current time for all city codes in the Timekeeping Mode is calculated in

accordance with the Greenwich Mean Time (GMT) differential for each city, based

on the your Home City time setting.

• GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC) data.

12-hour/24-hour Timekeeping Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

applied in all other modes.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and the no indicator appears to the left of

the hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24

indicator.

Inputting Text

The following describes how to input text in the Day Counter and Telememo Modes.

To input characters

Day Counter record

setting screen

Cursor

2. When the character you want is at the cursor position, press C to move the cursor

to the right.

3. Repeat steps 1 and 2 to input the rest of the characters you want.

Backlight Precautions

• The electro-luminescent panel that provides illumination loses power after very long

use.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

• The backlight automatically turns off whenever an alarm sounds.

• Frequent use of the backlight shortens the battery life.

• This watch is able to receive the time calibration signal

transmitted from Mainflingen, Germany (located 25

kilometers southeast of Frankfurt). Signal reception is

possible within the area represented by a circle with a

radius of about 1000 kilometers.

• Even when the watch is within the reception range,

signal reception is impossible if the signal is blocked by

mountains or other geological formations between the

watch and signal source.

• Signal reception may be poor in the shaded area on the

map, even though it is within 1,000 kilometers of the

signal transmitter.

• Signal reception is affected by weather, atmospheric

conditions, and seasonal changes.

1. When the cursor is on the display, use B and D to

cycle through the available letters, numbers and

symbols, in the sequence shown below.

Press D.

Press B.

(space)

2362-4

–