Danfoss ECtemp 532 Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss ECtemp 532. Danfoss ECtemp 532 16 страниц.

Danfoss ECtemp 532

Connect the thermostat according to the connection

diagram.

The screen of the heating cable must be connected

to the earth conductor of the power supply cable by

using a separate connector.

Note: Always install the floor sensor in a conduit in

the floor.

Set the maximum floor temperature between 20° and

50°C by turning the screw with temperature indica-

tions in the upper left corner.

Mount and reassemble the thermostat:

• Fasten the thermostat to a flush-mounting box

or a surface-mounting box by driving the screws

through the holes in each side of the thermostat.

• Install the frame and front cover in the reverse

order of disassembly.

Turn on the power supply.

Installation Guide

LOAD

Mains

Max. Load

220-240V~

15 (1) A

D532

NTC

IP31

-10T30