Danfoss FP735Si Руководство по установке - Страница 15
Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss FP735Si. Danfoss FP735Si 20 страниц. Electronic 3-channel full programmer for heating and hot water with service interval timer
Также для Danfoss FP735Si: Краткое руководство (4 страниц), Простое руководство пользователя (2 страниц)
Печатать страницу
To perform a standard copy operation:
a) Press CH to select the channel.
b) Press PROG to go to event programming.
c) Press DAY/HOL to select the day to copy to.
d) Press COPY/i to copy the previous day's events to the displayed
day.
Advanced Copy
The Advanced Copy function is available in 7 day mode only. This
allows any day to be copied to any other day, or days.
To use the Advanced Copy function, go into the event programming
using the PROG button, then:
1) Press DAY/HOL to select the day to be copied from.
2) Press COPY/i to copy from the selected day.
When selected, the day will begin to fl ash.
3) Press DAY/HOL to select the day to be copied to.
4) Press COPY/i to copy to the selected day.
5) Repeat steps 3 and 4 to select and copy other days.
6) To stop copying, use the DAY/HOL button to go back to the
fl ashing day and press the COPY/i button. The previously
fl ashing day will stop fl ashing to indicate it has been de-selected.
NOTE: When a day has been copied to, it will remain visible and not
fl ashing when the DAY/HOL button is used to select other days.
Channel Copy
Channel Copy is used to copy events from one channel to another
channel.
To perform a Channel Copy operation:
a) Press CH to select the channel to copy to.
b) Press COPY/i to copy from the previous channel.
Danfoss Heating
GB
15