Danfoss TP7001 series Руководство по установке - Страница 13

Просмотреть онлайн или скачать pdf Руководство по установке для Термостат Danfoss TP7001 series. Danfoss TP7001 series 20 страниц. Electronic 7 day programmable room thermostat
Также для Danfoss TP7001 series: Инструкции пользователя (2 страниц), Краткое руководство (4 страниц)

Печатать страницу

Danfoss TP7001 series Руководство по установке

Option 74 - Date Format for Calendar Clock

This allows date format to be chosen. Press + until

Option 74 is displayed, use V or Λ to select required

setting.

0 = European (dd/mm/yy) (Factory setting)

1 = American (mm/dd/yy)

Option 75 – LCD Switch Off

This option allows the measured temperature part of

the display to be disabled or all of the display to be

switched off when not in use.

Press + until Option 75 is displayed, use V or Λ to

select required setting.

0 = Display off after 5 minutes

1 = Measured Temperature display disabled

2 = LCD always active (Factory setting)

Option 80 - Enable / Disable + Hours Function

Enables or disables the +Hours button. Press + until

Option 80 is displayed, use V or Λ to select required

setting.

0 = Disabled

1 = Enabled (Factory setting)

Option 81 - Thermometer Calibration Bias

This allows the thermostat calibration to be biased by

up to ±1.5°C. Press + until Option 81 is displayed, use

V or Λ to select required setting.

Any value between -1.5ºC and 1.5ºC in 0.5ºC steps

Factory setting is 0.0ºC

Danfoss Heating