Danfoss TP7001 series 설치 매뉴얼 - 페이지 13

{카테고리_이름} Danfoss TP7001 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP7001 series 20 페이지. Electronic 7 day programmable room thermostat
Danfoss TP7001 series에 대해서도 마찬가지입니다: 사용자 지침 (2 페이지), 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Option 74 - Date Format for Calendar Clock

This allows date format to be chosen. Press + until

Option 74 is displayed, use V or Λ to select required

setting.

0 = European (dd/mm/yy) (Factory setting)

1 = American (mm/dd/yy)

Option 75 – LCD Switch Off

This option allows the measured temperature part of

the display to be disabled or all of the display to be

switched off when not in use.

Press + until Option 75 is displayed, use V or Λ to

select required setting.

0 = Display off after 5 minutes

1 = Measured Temperature display disabled

2 = LCD always active (Factory setting)

Option 80 - Enable / Disable + Hours Function

Enables or disables the +Hours button. Press + until

Option 80 is displayed, use V or Λ to select required

setting.

0 = Disabled

1 = Enabled (Factory setting)

Option 81 - Thermometer Calibration Bias

This allows the thermostat calibration to be biased by

up to ±1.5°C. Press + until Option 81 is displayed, use

V or Λ to select required setting.

Any value between -1.5ºC and 1.5ºC in 0.5ºC steps

Factory setting is 0.0ºC

Danfoss Heating