Danfoss TP7001 series 설치 매뉴얼 - 페이지 11

{카테고리_이름} Danfoss TP7001 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP7001 series 20 페이지. Electronic 7 day programmable room thermostat
Danfoss TP7001 series에 대해서도 마찬가지입니다: 사용자 지침 (2 페이지), 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Option 38 - Relay State on Low Battery Detect

(Battery powered versions only)

This establishes the position that the relay is driven to

when the unit shuts down due to low battery state.

Press + until Option 38 is displayed, use V or Λ to

select required setting. This option is only possible on

battery versions.

0 = Output OFF (Factory setting)

1 = Output ON

Option 40 - Number of Events per Day

This sets the thermostat to operate with either 2, 4 or 6

switching events per day or to run in stat mode. Press

+ until Option 40 is displayed, use V or Λ to select

required setting.

1 = Stat

(Manual operation - no programming function)

2 = 2 Events per day

4 = 4 Events per day

6 = 6 Events per day (Factory setting)

Option 41 - Operating Mode

(7 Day, 5/2 Day or 24 Hour)

This sets the thermostat to operate using either 7 day,

5/2 day or 24 hour mode. Press + until Option 41 is

displayed, use V or Λ to select required setting. This

option is not possible if the thermostat is set to STAT

in option 40.

7 = 7 Day (Factory Setting)

5-2 = 5+2 Day (or A-B if A days is set in option 1)

24 = 24 Hour

Danfoss Heating