audiodata ArtTwo Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Акустическая система audiodata ArtTwo. audiodata ArtTwo 17 страниц.

Spikes

Spikes are primarily used to ensure a stable, low-resonance set-up. The small contact

area of the spike tips achieve a link to the floor or speaker stand and ensure that the

loudspeaker sits stably in its set-up position.

Floors that are vibratory and have a tendency to resonate, i.e. typical older hall and

parquet floors, are an exception to the above recommendation. Any connection of the

loudspeaker to the unsuited flooring here would increase the tendency to boom in the

bass range and also not provide the desired stability.

In these situations use either spikes with tips pointing up (available as an option), which

physically achieve a decoupling from the floor or use shock-absorbing pads (e.g.

rubber pucks), as offered in their range of accessories by your Hi-Fi retailer.

Take care when positioning the spikes under the loudspeakers: there is a high risk of the speaker

toppling over, as on the ArtTwo there are no slots or any other provisions made for the use of

spikes.

All Hi-Fi components, especially high-quality loudspeakers like the ArtTwo, require a

certain running-in time to deploy their full acoustic qualities.

During this time, mechanical parts of the loudspeaker chassis in particular, such as

surrounds and diaphragms, increasingly lose an initial stiffness that they have due to

the manufacturing process. Over the course of the first c. 20–100 hours of total playing

time, the sound gains as a result in subtlety, pliancy and warmth.

On a good system this development can be clearly noticed.

ArtTwo

1st edition, January 2019

Page 9