Dankoff Solar Water Feature Руководство по установке и обслуживанию - Страница 11

Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Водяной насос Dankoff Solar Water Feature. Dankoff Solar Water Feature 18 страниц. Solution kit

5. SOLAR ARRAY WIRING

Warning – The photovoltaic array generates hazardous voltages. A 48 Volt (nominal) array can generate nearly 100
volts when disconnected from load.
To prevent shock hazard while working on array wiring, be certain the breaker inside the disconnect is in the "OFF"
Attention – Wiring the panels in the wrong configuration (series or parallel) can damage the pump. Be certain of the
wiring configuration (See Figure below: Solar Panel Wiring Diagram for examples) prior to connecting the array.
Additionally, it is recommended to cover or shade the panels when connecting them to the controller or pump. This
prevents electrical discharge from damaging the equipment. Any damage caused by disregarding these warnings
will NOT be covered under the warranty.
Connecting the Solar Array
Now that the PV Array is mounted on the rack and in place it is time to make the electrical connections. All of the
connections on The Water Feature Solution Kit use standard PV quick connects. The figure below shows the basic
wiring:
position or cover the array to shade it.
Disconnect
Switch
11