Dankoff Solar Water Feature Manuel d'installation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dankoff Solar Water Feature. Dankoff Solar Water Feature 18 pages. Solution kit

Imprimer la page

5. SOLAR ARRAY WIRING

Warning – The photovoltaic array generates hazardous voltages. A 48 Volt (nominal) array can generate nearly 100

volts when disconnected from load.

To prevent shock hazard while working on array wiring, be certain the breaker inside the disconnect is in the "OFF"

Attention – Wiring the panels in the wrong configuration (series or parallel) can damage the pump. Be certain of the

wiring configuration (See Figure below: Solar Panel Wiring Diagram for examples) prior to connecting the array.

Additionally, it is recommended to cover or shade the panels when connecting them to the controller or pump. This

prevents electrical discharge from damaging the equipment. Any damage caused by disregarding these warnings

will NOT be covered under the warranty.

Connecting the Solar Array

Now that the PV Array is mounted on the rack and in place it is time to make the electrical connections. All of the

connections on The Water Feature Solution Kit use standard PV quick connects. The figure below shows the basic

wiring:

position or cover the array to shade it.

Disconnect

Switch