3xLogic VISIX VX-VSS-20 Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Камера безопасности 3xLogic VISIX VX-VSS-20. 3xLogic VISIX VX-VSS-20 14 страниц. Stereoscopic people counting camera

3xLogic VISIX VX-VSS-20 Краткое руководство по эксплуатации
1. Keep the 3xLOGIC logo facing the same direction as the Front arrow indicator on the back of the device.
See below example for reference:
2. Make sure the camera is mounted vertically above the passenger flow (90°, vertical to the ground).
Reference the below example:
Figure 3-5 Passenger Flow (perpendicular to the door)
3. For some scenarios where there are multiple cameras, mount the cameras as per the two below
guidelines:
If there are turnstiles, each camera should be mounted to monitor a specific turnstile
Figure 3-6 Sketch map of multiple cameras installation
If there is no turnstile, mount the cameras in one line, and make sure the cameras have the same
focal length. Then, keep a proper distance between each camera according to the overlap (see the
yellow area below) of the adjacent two cameras' counting width. The suggested overlapping length is
between 0.2-0.5m.
Figure 3-7 Sketch map of multiple cameras installation
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20
Figure 3-4 Front Arrow and 3xLOGIC Logo
6