3xLogic VISIX VX-VSS-20 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Камера спостереження 3xLogic VISIX VX-VSS-20. 3xLogic VISIX VX-VSS-20 14 сторінок. Stereoscopic people counting camera
Друкувати сторінку
1. Keep the 3xLOGIC logo facing the same direction as the Front arrow indicator on the back of the device.
See below example for reference:
2. Make sure the camera is mounted vertically above the passenger flow (90°, vertical to the ground).
Reference the below example:
Figure 3-5 Passenger Flow (perpendicular to the door）
3. For some scenarios where there are multiple cameras, mount the cameras as per the two below
guidelines:
►
If there are turnstiles, each camera should be mounted to monitor a specific turnstile
Figure 3-6 Sketch map of multiple cameras installation
►
If there is no turnstile, mount the cameras in one line, and make sure the cameras have the same
focal length. Then, keep a proper distance between each camera according to the overlap (see the
yellow area below) of the adjacent two cameras' counting width. The suggested overlapping length is
between 0.2-0.5m.
Figure 3-7 Sketch map of multiple cameras installation
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20
Figure 3-4 Front Arrow and 3xLOGIC Logo
6