Audioplex AT-6P Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Оборудование для звукозаписи Audioplex AT-6P. Audioplex AT-6P 3 страницы. Six speaker selector with automatic impedance matching protection

Печатать страницу

Connect each of the two amplifiers to the "A" and "B" terminals as shown. Make sure the + and -, and

L and R channel connections are correct to avoid unsatisfactory operation or dead channels.

The same precautions should be used when connecting the speakers, crossed channels, polarity , or

grounds will result in improper operation.

Rubber feet provide a non-marring, stable mount for the AT-6P switcher. They are high enough to help

promote air circulation under the unit, keeping it cool. A good precaution is to install in a manner that

allows free air circulation around the unit. Avoid placing the AT-6P on any surface that is easily damaged

by heat, the switchbox can become quite warm if operating with all speakers "ON" at high power.

The AT-6P front panel buttons all operate in the same manner, push to turn ON, push again to turn OFF.

The switch is "ON" when pushed in closest to the AT-6P front panel.

To select speaker pairs, push the buttons in for the desired choices. If all speakers are 8 and/or 16

Ohms, proper loading for the amplifier is automatic no matter what combination is selected. If some of the

speaker pairs in each group of 3 (1, 2 & 3, or 4, 5 & 6) are rated at 4 Ohms, the associated 4 Ohm switch

should be pushed in when more than one pair of speakers is operating simultaneously in that bank. The

automatic impedance matching circuits will then provide proper protection at all times regardless of the

number of speaker systems in operation.

Your AUDIOPLEX TECHNOLOGY AT-6P Speaker Selector Switch is covered by a LIFETIME

warranty against any defects in workmanship and materials. Any defects will be remedied without charge

for labor or parts.

Damage incurred by shipping or accident is not considered to be a defect, and not covered by this

warranty. AUDIOPLEX TECHNOLOGY, is not responsible for defective operation caused by abuse or

by modification or service by any unauthorized person or agency.

The unit must be properly installed and operated according to instructions for the warranty to apply .

Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be returned

expenses prepaid, with written authorization from the company. The product must be shipped with the

proof of purchase and in the original carton and packing material to avoid damage.

This warranty gives you specific legal rights. You may have other rights which vary from state to state.

OPERATION

WARRANTY: