Consort SLPBWIFI Руководство по установке и управлению - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке и управлению для Контроллер Consort SLPBWIFI. Consort SLPBWIFI 8 страниц. Wireless controller
Печатать страницу2
Please read this guide carefully and retain for future use and maintenance.
SLPBWIFI
WARNINGS
Do NOT handle the appliance with wet hands.
·
Do NOT use the appliance in workshops or rooms with high dust
·
exposure.
Do NOT cover or restrict any aperture.
·
Do NOT use the appliance if damaged.
·
Do NOT leave the appliance unattended where young children
·
are present.
Ensure that nothing is pushed into any aperture of this controller.
·
Operating temperature range -10 to +40ºC.
·
1. Getting to know your SL wireless controller
The SLPB controller can control multiple heaters within its RF range. All heaters have to be installed in the same
room as a SLPBWIFI. The RF range can be extended if necessary, see product code SLEXT.
When used without WIFI, the controller will only have basic on/off functionality.
When connected to WIFI, the controller offers 4 operating modes. The required mode can only be selected
via the Consort Connect app.
Operating modes:
Manual
·
Frost protection
·
Boost
·
Automatic timer
·
There are 4 light indicators around the button showing status of the controller. These indicators can show one
of four options listed below.
There is also a blue indicator light located in the bottom left corner of the controller. This will be flashing during
connecting to the WIFI, and be solid when connected.
Heating Active - All four segments are solid green, heaters are producing heat.
Heating active in BOOST mode - All four segments are slow flashing green, heaters are producing
heat.
Connecting to APP / WIFI - When the blue and green lights are rapidly flashing, the controller is in
registering to WIFI and APP. This happens when the button is held within 10 seconds of powering the
controller. Refer to section 'Pairing to the Consort Connect app' for more details.
Standby mode - After the heating is switched off, either double pushing the button, using the APP or
because the target temperature has been reached, the LED segments change to red. After 5 sec-
onds, the segments will switch off completely. The heating is off.
Pairing with heaters - When the yellow light is rapidly flashing, the controller is pairing with heaters.
This happens when the button is held after the controller has been powered for 30 seconds. Refer to
section 'pairing with heaters' for more details.
Open window detection active - All four segments are slow flashing yellow, heaters aren't produc-
ing heat.
Wireless
Controller
Installation and User Guide