Audioroot eSMART BC1150 Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Аксессуары для фотоаппаратов Audioroot eSMART BC1150. Audioroot eSMART BC1150 5 страниц. 6 bay smart battery combiner/coupler in pc1150 with built-in 2 x 4a sequential charger and eink display
Печатать страницу4. Fan air outake
5. Display refresh button
6. eINK display
7. DC current output switch
8. Air intakes
9. USB mini port – for firmware upgrades
10. Legacy mode switch – set the switch to ON when using the BC1150 with a eSMART BG-DU or K-
ART
11. Soft reset – push this button to reset the internal microcontroller and eINK display.
OPERATION:
The eSMART BC1150 is fully plug'n'play. To install the batteries simply slide them into each one of
the 6 slots. Make sure that each battery is fully inserted. If not the lid of the Pelicase won't be able to
close properly. Batteries are held in place securely once the lid of the case has been closed. Spring
mounted stoppers allow the use of short (eSMART Li-48neo, Li-49Wh) or long (Li-96neo, Li-98Wh)
batteries. Short and long batteries can be used in any combination. The BC1150 can work with 1 to 6
batteries however current limitations may apply (see important note below).
Once a load is connected to DC OUT (#1) and if the switch (#7) is set to the ON position the
batteries will start to drain and power will be fed to the connected equipment.
IMPORTANT NOTE
with the highest charge level will start to drain first. All batteries will drain at the same rate and share the
load once they've reached even voltage/capacity levels. DC OUT can supply up to 11.5A of current if
enough batteries have the same charge level. If not DC OUT current will be limited by the specifications of
the battery with the highest charge level :
http://www.audioroot.fr [email protected]
: the 6 batteries share their power via OR'ing diodes. As a result the batteries
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation