DAPAudio HM-30 Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Микрофон DAPAudio HM-30. DAPAudio HM-30 10 страниц.
Также для DAPAudio HM-30: Руководство (8 страниц)

Печатать страницу

Set Up and Operation

Set all volume and gain controls on your mixer, mic preamp or recording device are at their minimum

settings before connecting the microphone. Make sure the phantom power is turned off!

Once the HM-30 is plugged in, move the channel fader gradually to the 0dB position adjust the input

gain using your channel peak led or VU-meter.

Frequency and polar patterns

Connection Cables

Take care of the connector cables, always holding them by the connectors and avoiding knots and

twists when coiling them: This gives the advantage of increasing their life and reliability.

Periodically check that your cables are in good condition, that they are correctly wired and that all their

contacts are in good condition: a great number of problems (faulty contacts, ground hum, discharges,

etc.) are caused entirely by using unsuitable or faulty cables.

Headphones

Unbalanced mono 1/4" jack plug Balanced mono 1/4" jack plug