APLIC 20180528SZ137 Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Зарядное устройство APLIC 20180528SZ137. APLIC 20180528SZ137 16 страниц. 2-bay battery charger
Печатать страницу
4.1 Key functions
Connection
When power adapter
is connected
Without power
adapter
5. Power supply
Use only a power supply, which meets the specifications of this device (DC 12V /
3A). Pay attention to the correct polarity of the contacts. Please also bear in mind
that the maximum charging current depends on the capacity of the power supply.
6. Setting up
Take the device out of the package and remove all the packaging material. Plug the
supplied power adapter to a properly installed power socket and to the battery
charger. You can then insert the desired type of battery into the charger.
Caution! Charge only rechargeable batteries. Please do not use non-rechargeable
batteries!
Various data such as the actual voltage and the charging status is shown in the
display as soon as a battery is inserted. The actual charging current is shown at the
bottom of the display. This can be adjusted between 500mA and 2000mA. Press
and hold the "MODE" button to configure the current until the selection arrow
starts to flash over the current. Then, you can adjust the current by briefly pressing
the "MODE" button. The corresponding current is enabled once the arrow stops
flashing.
12
"MODE" key
Function
keep it pressed
Current setting
• Alternates between voltage dis-
press briefly
• During current setting, changing
Switch on Powerbank function (only
press briefly
possible with at least one Li-ion
battery in place!)
play and percentage display
the charging current
English