Apogee S2-131-SS Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Apogee S2-131-SS. Apogee S2-131-SS 15 страниц. Red - far-red sensors

OPERATION AND MEASUREMENT

Connect the sensor to a measurement device (meter, datalogger, controller) capable of measuring and displaying

or recording a millivolt signal (an input measurement range of approximately 0 to 12.5 mV is required to cover the

entire range of red and far-red photon flux density from the sun). In order to maximize measurement resolution

and signal-to-noise ratio, the input range of the measurement device should closely match the output range of the

quantum sensor. DO NOT connect the sensor to a power source. The sensor is self-powered and applying voltage

will damage the sensor.

Wiring for S2-131

White: Positive (signal from far-red sensor)

Blue: Negative (signal from red sensor)

Yellow: Positive (signal from red sensor)

Clear: Shield

Black: Negative (signal from far-red sensor)