DURKOPP ADLER 0867 590124 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для швейных машин DURKOPP ADLER 0867 590124. DURKOPP ADLER 0867 590124 16 страниц. Fitting remaining thread monitor for var. kits
Печатать страницу
Anbauanleitung des Restfadenwächters
für div. Bausätze (siehe Pkt. 1.1)
Instructions for fitting remaining thread monitor
1
2
Ausgabe/Edition:
10.2006
for var. kits (see section 1.1)
–
Secure all cable to the bed plate of the thread monitor control
using the fastening clamps 1 and 2.
–
Screw the remaining thread monitor support plate with the
pre-assembled ciruit board on the bed plate (see picture).
Lay the cable in the machine:
–
Lead the cable 4 from thread monitor control to the valve
circuit board through the cable support 3 in the arm of the
machine.
4
–
Connect the cable 4 (connecting cable to the valve circuit
board) to the connector X24 of the valve circuit board 5.
–
Lead the cable of the light barrier through the holes in the
base plate and fix it to the strand (electric wires, pneumatic
and oil hoses).
–
Roll up the cable left over that is too long and fix it to the bed
plate of the thread monitor control using the cable ties.
Printed in Federal Republic of Germany
3
5
(X24)
Teile-Nr./ Part-No.:
0791 867702
Blatt:
von
Sheet: 12
from 16